PXE / Net booting Open Solaris 200805 release.
Introduction
After the disk in my laptop recently died I decided that it would be a good time to try and install the latest version of Open Solaris onto my laptop. Unfortunately the only option I have for installing new operating systems onto this laptop is via PXE boot, this has not been an issue in the past as I’ve been installing Debian / Ubuntu.
Solaris is fully capable of being network installed, in fact there are a multitude of tools out there that assist you in doing so. However, this is not true for the latest release of Open Solaris, support is planned but its currently not available. As a learning exercise I decided that I’d attempt to get this working on my laptop, turns out its entirely possible with a little bit of fiddling.
Note: This does not create a hands-off installer, it merely boots the livecd from the network. You can then install the system as you would normally from the gui installer.
Note 2: Part of this guide contains an ugly hack, its awful and may not work for you at all - you have been warned.
Requirements
You will need to the following to PXE / Net boot Open Solaris
- Time
- One copy of the Open Solaris CD Image.
- One system already running Open Solaris (to manipulate the boot archive)
- One PXE Boot Server (one part DHCP server, one part TFTP server and one part NFS server)
- One PXE Boot Client (with sufficient hardware to run Open Solaris)
- One network which both the client and server are connected to.
Setting up PXE Boot.
I’m going to assume that you know how to setup a PXE boot server, there are many documents regarding this for other operating systems which can be used to fill in the blanks here. Personally I used ubuntu Gutsy Gibbon as my PXE boot server.
The following steps explain which files need to be taken from the cdrom image and placed on your PXE boot server.
- Mount the cdrom image somewhere on your system (I chose /mnt/cdromimage/)
- From the cdrom image copy out the following files into your tftp directory (/tftpboot/ on my system)
# cp /mnt/cdromimage/boot/grub/pxegrub /tftpboot/boot/grub/
# cp /mnt/cdromimage/boot/x86.microroot /tftpboot/solaris/
# cp -r /mnt/cdromimage/platform/* /tftpboot/solaris/platform/
- Note: you do not need all of the contents of of the /platform/ directory, however, its only 6mb in total its easier to include it all than remove what we don’t need.
- Create the file /tftpboot/boot/grub/menu.lst with the following contents:
default=0
timeout=60
timeout=3
title Open Solaris PXE Install
kernel$ /solaris/platform/i86pc/kernel/$ISADIR/unix -m verbose -B install_server=[ip of your nfs server]:/export/opensolaris/
module /solaris/x86.microroot
- When setting up your dhcpd boot entry for the Open Solaris client machine ensure that you include the following dhcp options (this is for the ubuntu dhcpd server, this is different under Solaris)
option grubmenu code 150 = text;
host laptop {
hardware ethernet 00:XX:00:XX:00:XX;
option grubmenu “/boot/grub/menu.lst”;
fixed-address 192.168.1.34;
option subnet-mask 255.255.255.0;
option routers 192.168.1.10;
next-server 192.168.1.20;
filename “/boot/grub/pxegrub”;
}
With your dhcpd and tftpd services up and running you should now be in a position to boot the client, this will get you to a point where the system has loaded the kernel + microroot. The boot will fail when we attempt to mount the cd rom.
Editing the miniroot
To complete the boot process we need to update the microroot and tell it to mount the cdrom from an nfs server instead of from a local cdrom drive. Now is the time to load up the Open Solaris machine you installed earlier, mount the open solaris iso and copy the x86.miniroot file somewhere handy (ready for editing).
The miniroot is a gziped ufs file system image, its relatively easy for us to open it up and manipulate as we please.
# mv x86.microroot x86.microroot.gz;gunzip x86.microroot.gz
# lofiadm -a /path/to/x86.microroot /dev/lofi/1
# mount /dev/lofi/1 /mnt/microroot
So now we have the microroot mounted under /mnt/microroot, lets make some changes. First of all there are three utilities I’ve added to the microroot to aid in net booting. These can be added in the following way:
# cp /usr/sbin/prtconf /mnt/microroot/usr/sbin/
# cp /usr/sbin/i86/prtconf /mnt/microroot/usr/sbin/i86/
# cp /usr/bin/cut /mnt/microroot/usr/bin/
# cp /usr/bin/sed /mnt/microroot/usr/bin
We now have all the utilities required on the microroot to mount the cd image over nfs, the next step is to update the script that mounts the cdrom image.
Note: Here is where the nasty hack is, as I couldn’t convince nwamd (network automagic daemon) or the default network service to actually bring up the network correctly I run perform a dhcp request in the script that mounts the cdrom image. Ideally we should bring networking online via the networking physical service (or nwamd if thats what its actually designed to be used for) and have the live-fs-root service depend on the networking. Anyway, as there is an official net boot utility in the pipeline I hope this will suffice until thats available.
On with the hacking, edit the /mnt/microroot/lib/svc/method/live-fs-root startup script. Find the following line:
echo “\rPreparing live image for use” >/dev/msglog
Just below this line add in our few lines to grab the install_server value, send out a dhcp request followed by mounting the network file system.
# grab the install_server setting from boot
install_server=`/usr/sbin/prtconf -v /devices|/usr/bin/sed -n ‘/install_server/{;n;p;}’|/usr/bin/cut -f 2 -d\’`
# Awful hack - configure dhcp for all the plumbed interfaces
/sbin/ifconfig -a dhcp
# now mount the install server onto /.cdrom
/sbin/mount $install_server /.cdrom
The above few lines do not perform any sanity checks, if any of the commands fail you’ll just get dumped to a single user login prompt.
Now that we are finished editing the micro root its time to unmount and re-compress it before dumping it back into the tftp directory on your PXE boot server.
# umount /mnt/microroot
# lofiadm -d /dev/lofi/1
# gzip x86.microroot;mv x86.microroot.gz x86.microroot
Finally..
The last thing to do is to export the contents of the cd image over nfs, I chose to export it from /export/opensolaris/. It may help you to know that Solaris has issues mounting nfs v4 from Linux servers (certainly from ubuntu gutsy release), I had to disable nfs v4 services under linux to mount the nfs file system from my Solaris system.
If everything has gone smoothly you should now be in a position to boot your client machine, which once the pxe boot has completed should run just as it would had it been booted from cdrom.
If you get dumped to a single user login prompt its safe to assume something has gone wrong, I’d recommend logging in (root pw: opensolaris) and verifying that each of the steps we take in the mount cdrom script works correctly.
